A CNC-turned part is usually recognized by its round features: a shaft with several diameters, a bushing with a bore, a threaded stud, or a sleeve with an internal and external diameter.
CNC Turned Parts: Common Features, Tolerances, Materials, and Design Guidelines Read More »
Finding a CNC aluminum parts manufacturer requires quality service, reasonable pricing, and fast shipping. Aluminum CNC parts manufacturing is very important in many sectors, including healthcare, aviation, and automotive, in order to run operations efficiently.
CNC Aluminum Parts Manufacturer: How to Choose the Best Supplier Read More »
Phosphate coating is used on steel for a different reason than a plated finish. The treatment reacts with the prepared steel surface and forms a phosphate crystal layer. That layer can then serve as a base for paint or retain oil on a mechanical component.
A 4-axis machine can reach more sides of a part without removing it from the fixture. A 5-axis machine goes further by moving the tool and workpiece through multiple angles during the cut.
4 Axis Vs 5 Axis CNC Machining: Part Geometry, Accuracy, Setup, and Cost Read More »
Polycarbonate is easier to cut than many engineering materials. However, obtaining a clean machined part requires control over heat, chips, and cutting pressure.
Polycarbonate CNC Machining: Tooling, Cutting Parameters, and Crack Prevention Read More »
304 stainless steel is a common material for CNC machined parts. Many shops machine it every day for housings, brackets, shafts, fittings, and equipment components. The material cuts differently from aluminum and low-carbon steel, so machining conditions usually need closer attention.
304 Stainless Steel Machining: Work Hardening, Tool Selection, and Cutting Strategies Read More »
If you’ve ever looked at a machining drawing and wondered how every feature could be produced without repositioning the part several times, that’s usually the point where 5-axis machining enters the discussion. It isn’t selected because the machine has more movement.
A CNC part rarely starts with the question, “Should it be milled or turned?” Instead, the drawing usually provides the answer. A shaft with multiple diameters naturally follows a turning process, while a mounting plate with pockets and drilled holes requires milling.
CNC Milling vs Turning: Differences, Part Shapes, Tolerances, and Cost Read More »
Good-quality material is needed by modern-day manufacturing in order to do tough jobs. The PEI material is one of the best materials that can be used because it works well where other plastics have failed. It is strong and heat-resistant.
PEI Material: Properties, Applications, Advantages, and CNC Machining Read More »
Surface finishing is one of the most critical factors in measuring the quality of parts in modern manufacturing. A plastic
How to Achieve Better Surface Finish in CNC Plastic Machining Read More »
In this article, we’ll compare milling and drilling by looking at their cutting tools, machining methods, achievable accuracy, production capabilities, and the types of features each process is designed to produce.
Milling vs Drilling: Differences in Tools, Operations, Accuracy, and Applications Read More »
CNC machining is the computer-controlled manufacturing process for making parts. This process is useful for companies that need to cut metal and plastic quickly and with great detail. However, sometimes these errors occur during the cutting process. Errors in the production of CNC parts are referred to as CNC machining defects. This can ruin a whole batch of parts in just a few minutes.
Common CNC Machining Defects and How to Fix Them Read More »
Upload your CAD files and receive a quotation within 12 business hours.